Windowell Expressions - We Hide Ugly
Windowell Expressions - We Hide Ugly
 

Frequently Asked Questions

Window Well Liners And Foundations:

What sizes do they come in?
Do you stock the product?
Are all window wells the same?
Is it hard to install?
Are they expensive?
What is the approximate cost?
Do you install?
How do I measure?
How do I measure a foundation?

Lexan Covers:

Will the covers yellow?
Are they strong?
What kind of metal is the cover made of?
Is it sloped?
Will the covers crack?
Will Lexan covers fit all window wells?
What do they cost?
How do I measure?

Grate:

Do grates fit all wells?
How do I measure?
How many standard sizes of grates do you have?
What kind of coating do they have?
Will they rust?
Do you have ladders?



Window Well Liners And Foundations:

Q. What sizes do they come in? [Back To Top]
A. 2 ft. X 5 ft. is the smallest size we make and 7 ft. X 12 ft. is the longest that we make and everything in between.

Q. Do you stock the product? [Back To Top]
A. No – we custom manufacture for each customer depending on the size and style for their home.

Q. Are all window wells the same? [Back To Top]
A. No – window wells vary depending on the age of your home and the size of window and well you have in your home.

Q. Is it hard to install? [Back To Top]
A. No – the 1st stone is a little tough, but if you follow the instructions you will be fine.

Q. Are they expensive? [Back To Top]
A. They are not cheap. Polyurethane is not a cheap product, but it is known for its weather resistance and durability. It will outlast most of us!

Q. What is the approximate cost? [Back To Top]
A. $10.00 a square foot shipped in most situations. The more you buy the cheaper shipping is.

Q. Do you install? [Back To Top]
A. Yes – in areas where we have a dealer. It really isn’t that hard to do it yourself.

Q. How do I measure? [Back To Top]
A. For liners, you need to take a perimeter measurement and a depth measurement. You can measure from either inside or outside the well, just be safe it hurts to fall in. With your tape, wrap it around the inside perimeter concrete to concrete or into the window depending on your style of well. Now measure the depth. We suggest adding 2” to the depth so you can bury it below ground but if you want to add some rock to dress up the bottom don’t add anything. Email the size and style and we will do the rest.

Q. How do I measure a foundation? [Back To Top]
A. Best thing is map out the area you want to cover. Measure the lengths and heights and fax it to us at (801) 270-9357 and we can help you lay it out.


Lexan Covers:

Q. Will the covers yellow? [Back To Top]
A. We us a U.V. treated Lexan that has a 10 yr. Guarantee.

Q. Are they strong? [Back To Top]
A. Yes – as long as you don’t plan on using it as a trampoline. They have a 250 lbs. Weight capacity. Every thing you will need if someone were to fall.

Q. What kind of metal is the cover made of? [Back To Top]
A. Our support system is all Aluminum. The two major bonuses of aluminum are it is lightweight and it will never rust.

Q. Is it sloped? [Back To Top]
A. Yes – side-to-side and well as back to front.

Q. Will the covers crack? [Back To Top]
A. No – not for a long time at least. Lexan is used in many ways shere impact is an issue. Airplane and race cars windshields are made from Lexan. You can literally hit it with a hammer (not recommended) and it will bounce back in place with no memory (meaning it won’t leave a dent).

Q. Will Lexan covers fit all window wells? [Back To Top]
A. Yes – however, we only have certain sizes available. If you send us a template, we will make them to your size at no additional cost.

Q. What do they cost? [Back To Top]
A. It depends a lot on the size, type and quantity but $14.00 per square foot and up including shipping. If you email us the size, we will give you and exact price.

Q. How do I measure? [Back To Top]
A. Measure the widest part of the well where it meets the house and go outside edge to outside edge. Come around to the center of the well and measure from the house not the window to the outside edge of the well. Make sure to measure all your wells individually. They may look the same size, don’t trust it, just measure. Email us the size and we will take it from there.



Grate:


Q. Do grates fit all wells? [Back To Top]
A. No – and they are very expensive to customize, but we can do it.

Q. How do I measure? [Back To Top]
A. Measure the widest part of the well where it meets the house and go outside edge to outside edge. Come around to the center of the well and measure from the house not the window to the outside edge of the well. Make sure to measure all your wells individually. They may look the same size, don’t trust it, just measure. Email us the size and we will let you know your options.

Q. How many standard sizes of grates do you have? [Back To Top]
A. 28, so we can cover most wells.

Q. What kind of coating do they have? [Back To Top]
A. Our standard grates are bronze and black baked powder coat. It looks very nice and it’s durable. Our custom grates are a dipped paint process.

Q. Will they rust? [Back To Top]
A. Yes – I suggest buying a can of paint and keeping an eye on them. Spray them before the really get to rusting. You can keep them looking nice.

Q. Do you have ladders? [Back To Top]
A. Yes – 4ft. – 5ft. – 6ft.
Recent Projects

Window Well Decor
View More


Window Well Cover
View More


Foundation Cover
View More

 

 

Home
| About Us | Products | Pricing | Become A Dealer | Installation | FAQs | Contact | Bookmark This Site
©2006-09 Windowell Expressions - 199 W. 4800 So., Murray, UT 84107
Site Designed & Maintained by KMWeb Designs